Learn the basics of working with Beadtec knotting nylon cord. Learn to burn the end of the cord using a thread burner, how to string on large hole Athenacast beads and create perfectly spaced knots using an awl. Finish off your design with slip knots to make an adjustable necklace or bracelet.
Athenacast Metal Beads Square Cube Large Hole 2mm | Real 24k Gold Plated
Step 3: Need More Help? Follow these Steps
Quick Project Steps
Materials Needed: BeadTec knotting nylon cord (black and brown, 0.8mm), Athenacast metal beads, and charms.
Step 1: Cut the knotting cord to desired length. Burn the end with a thread burner to prevent fraying.
Step 2: String a bead or charm onto the cord. Use an awl to place overhand knots for spacing.
Step 3: Add beads to each side, maintaining spacing with knots.
Step 4: Create slip knots for adjustable sizing. Use larger hole beads at the ends for ease of adjustment.
Step 5: Tie the final knots and burn the cord ends to secure. Adjust the size as needed.
Bring your Czech glass beads to life with this necklace of dancing and floating flashes of color. All you need is stainless steel beading wire, crimp tubes, a clasp, and any collection of Czech glass beads to make this on beat necklace.
Technique learned:CrimpingBasic Beading
Bring your Czech glass beads to life with this necklace of dancing and floating flashes of color. All you need is stainless steel beading wire, crimp tubes, a clasp, and any collection of Czech glass beads to make this on beat necklace.
Technique learned:
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
Join Our Growing Community
Our Testimonials
Only Visible on Admin Mode
Item Description
Learn the basics of working with Beadtec knotting nylon cord. Learn to burn the end of the cord using a thread burner, how to string on large hole Athenacast beads and create perfectly spaced knots using an awl. Finish off your design with slip knots to make an adjustable necklace or bracelet.
Designer's Material List
The Designer’s suggested colors and materials:
BeadTec Knotting Cord - Black.8mm
BeadTec Knotting Cord - Brown .8mm
Athenacast Metal Beads Round Corrugated Melon 4mm - Premium 99.9% Pure Silver Plating
Athenacast Metal Bead Slider Cross Large Hole | 6mm | Real 24k Gold Plated
Athenacast Metal Charms Link Connector Round Leaf | 12mm | Real Silver Plated
Athenacast Metal Beads Square Cube Large Hole 2mm | Real 24k Gold Plated
Project Steps
Materials Needed: BeadTec knotting nylon cord (black and brown, 0.8mm), Athenacast metal beads, and charms.
Step 1: Cut the knotting cord to desired length. Burn the end with a thread burner to prevent fraying.
Step 2: String a bead or charm onto the cord. Use an awl to place overhand knots for spacing.
Step 3: Add beads to each side, maintaining spacing with knots.
Step 4: Create slip knots for adjustable sizing. Use larger hole beads at the ends for ease of adjustment.
Step 5: Tie the final knots and burn the cord ends to secure. Adjust the size as needed.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
-Transparent.png)
