Potomac Crystal Rondelles (2x3mm in garnet AB, olivine, and metallic green iris)
Czech Glass Rondelle (7x11mm in olivine)
Gingerbread house toggle clasp with charm
Jump rings (6mm, 20 or 18 gauge)
Crimp tubes (2mm)
Beading wire (approximately 30 inches)
Tools: Needle nose pliers, wire cutters, (optional) crimping pliers
Step 3: Need More Help? Follow these Steps
Quick Project Steps
Gather all materials and tools as listed.
Cut the beading wire into three 10-inch pieces.
Attach one end of each wire to the clasp using crimp tubes.
String six Potomac Crystal Rondelles onto each wire.
Add a Czech Glass Rondelle, then repeat step 4 with different colored rondelles.
Continue alternating between the Potomac Crystal Rondelles and Czech Glass Rondelles until the desired length is reached.
Attach the other end of the wires to the other part of the clasp using crimp tubes.
Trim any excess wire and ensure all connections are secure.
Bring your Czech glass beads to life with this necklace of dancing and floating flashes of color. All you need is stainless steel beading wire, crimp tubes, a clasp, and any collection of Czech glass beads to make this on beat necklace.
Technique learned:CrimpingBasic Beading
Bring your Czech glass beads to life with this necklace of dancing and floating flashes of color. All you need is stainless steel beading wire, crimp tubes, a clasp, and any collection of Czech glass beads to make this on beat necklace.
Technique learned:
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
Join Our Growing Community
Our Testimonials
Only Visible on Admin Mode
Item Description
In this video, Allie Buchman from Potomac Bead Company teaches you how to make her quick & easy "3-in-1" bracelet, using Potomac Crystals.
Designer's Material List
The Designer’s suggested colors and materials:
Potomac Crystal Rondelles (2x3mm in garnet AB, olivine, and metallic green iris)
Czech Glass Rondelle (7x11mm in olivine)
Gingerbread house toggle clasp with charm
Jump rings (6mm, 20 or 18 gauge)
Crimp tubes (2mm)
Beading wire (approximately 30 inches)
Tools: Needle nose pliers, wire cutters, (optional) crimping pliers
Project Steps
Gather all materials and tools as listed.
Cut the beading wire into three 10-inch pieces.
Attach one end of each wire to the clasp using crimp tubes.
String six Potomac Crystal Rondelles onto each wire.
Add a Czech Glass Rondelle, then repeat step 4 with different colored rondelles.
Continue alternating between the Potomac Crystal Rondelles and Czech Glass Rondelles until the desired length is reached.
Attach the other end of the wires to the other part of the clasp using crimp tubes.
Trim any excess wire and ensure all connections are secure.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
-Transparent.png)
