The designer's suggested colors & materials:

Athenacast Jeweler's Wire 20 Gauge Round - Non-Tarnish Premium 24k Gold Plated, 4 Feet

Claspgarten Nested Pearl with Swarovski Circle Crystals Box Push Clasp | 16mm | 2-Strand | Real 23k Gold Plated, 1 Piece

Potomac Pearls - Cream 6mm, 20 Pieces

Prepare Materials: 20-gauge wire (cut into 6-inch pieces). 6mm glass pearls. Needle-nose pliers, round-nose pliers, and wire cutters. Decorative clasp for securing the bracelet. Create the Coiled Eye Pins: Bend the wire at a 90-degree angle using needle-nose pliers. Use round-nose pliers to form a loop at the end. Coil the remaining wire neatly around the base of the loop. Add Pearls to Eye Pins: Thread a 6mm pearl onto the wire. Create a second loop on the opposite side of the pearl, ensuring both loops are the same size. Connect the Eye Pins: Link the coiled eye pins together to form strands. Secure each connection by tightly closing the loops. Attach the Clasp: Connect the final eye pins of each strand to the loops of the decorative clasp. Reinforce the connection with additional coils for strength. Adjust Length and Symmetry: Add or remove eye pins to achieve the desired bracelet length. Ensure the strands are symmetrical for a polished appearance. Inspect and Finish: Check for sharp edges and trim excess wire. Verify all loops are aligned and secure for a professional finish.